QUICKtip: check the web for errata BEFORE you cast on

(A lot of QUICKtips lately because the garden calls--I've been hoarding these short little tips up for the busy days of summer....)

ERRATA (err-ah-tah; plural noun)
Errors in printing or writing, especially such errors noted in a list of corrections and bound into a book. [Latin errātum, from neuter past participle of errāre, to stray.]

Old hands have learned this the hard way--this TECHknitting QUICKtip is for newer knitters, and was inspired by a novice knitter I overheard in my LYS last winter--asking the workers why the pattern she'd bought a few weeks earlier wasn't working. The idea that it wasn't her fault--that the pattern could be wrong--clearly shocked her.

THEN

In the old days, publishers would send out "errata notices," little strips of paper that your LYS was supposed to paste or tape into a booklet to correct the errors the publisher found out about only after the booklet was published. Similarly, when you bought a pattern book, a flurry of little errata slips often fell out as you opened the book for the first time. The publishers quaintly believed that since the error was theirs, they ought to fix it.

NOW

With the advent of the web, publishers and designers have put the onus on YOU to check their websites to see if errata have been published. It would behoove you to do that--there are pretty much no publishers immune, and magazine patterns seem particularly prone to being full of errors. Not to mention yarn company patterns.

Bottom line: check the publisher's web site for pattern errata BEFORE you cast on. Heck, check the whole web--bloggers often find problems...before publishers do...

--TECHknitter

QUICKtip: controlling extra-long cables

If you are working with an extra-long circular needle (like for "magic loop" or back and forth knitting) the trick of inserting your hand into the loops of excess cable will stop the cable from whipping around with every stitch, whacking everything around you.

This trick works very well with the newer flexible no-memory cables, such as with Addi Lace needles (illustrated). It works less well with old-fashioned nylon cables, but your seat mate on that next flight will still thank you.

(This is a 47" needle being used "magic loop" style to knit a hat.)

--TECHknitter

QUICKtip: Knots can be your friends

The ancient Incas are said to have communicated by "quipu"--knotted strings which encoded information. You too can encode information in a simple knot. If you knit a swatch on size 7 needles, 7 knots go in the tail. The next time you wonder what needles you used with that yarn--ta da! Your own personal "quipu" is hanging on the swatch waiting to tell you. If you "borrow" your best size 5 circular needles from a project and put the project on a stitch holder, 5 knots go in the tail. When you find that project languishing 6 months from now, you won't be discouraged from taking it up again by not remembering what you were doing--your 5 knots will remind you that you were knitting with size 5 needles. As is apparent, this also works with millimeter sizes BUT you must not mix millimeter and American sizes--pick one or the other.

--TECHknitter

How to count rows

Angie, a reader, asks:

"How do I count the rows accurately in my active work? Do I include the cast-on row and the stitches on the needle(s) or not?"

A 2-part question gets a THREE-part answer...

1. COUNT THE CAST-ON?

Whether to count the cast-on depends on HOW you cast on.

• If you cast on with a loop method (such as backwards loop or forwards loop) the first row you knit is the first row of the work--the loop cast-on is not usually counted as a row. (This is a convention because, if the cast-on were to be counted as a row, pattern writers would have to write a different set of instructions for the first repeat of a texture pattern counted in rows.)
  
• If you cast on with the long tail method, the first row is knitted at the time of the cast on. Therefore, the first row you knit (or purl) after the cast-on is actually the second row of the work. (More detailed explanation at the long tail post.)
  
• With a cable method (also called "knitting on" or "chain cast on") it's knitter's choice -- this kind of cast-on is heavier than loop cast-on, but not quite as doubled as long-tail. 

click picture

Click the picture, it gets bigger.

2. COUNT THE STITCHES ON THE NEEDLE?

Yes, you do count the loops on the needle, because they are stitches which have already been knit. The confusion about this is because it is the NEW stitches you are going to put INTO the loops already on the needle which is going to determine how those loops will lay--whether they will be knit stitches or purl stitches. BUT, because they have already been created and are laying on your needles, there is no question that they've already been knit. Because they have been created, they ought to be counted, unless the directions say otherwise.

Now, despite all this hyper technical stuff, reality is that one row more or less might make a horrible mess of a TEXTURE pattern in a fabric, BUT -- one row here or there is unlikely to make a difference in the FIT of any knitted garment. Excluding the cast-on row from your row count makes no noticeable difference in the finished garment. What WILL make a difference is CONSISTENCY in counting rows between the different parts of your project.

Example: suppose the front of your new sweater is knit 76 rows to the underarm, NOT counting either row of a long-tail cast on as the first row, and NOT counting the stitches on the needle (in other words, not counting the red, green or blue rows of the illustration.) Now suppose the back is knit 76 rows to the underarm. This time, you DO count the rows you didn't earlier (in other words, this time, you do count the red, green and blue rows of the illustration.) The front piece would wind up 3 rows longer than the back. Awkward at seaming time. 

Bottom line: There is a convention for which rows to count as part of the row count. However, to achieve a good fit, CONSISTENCY in counting is the most important thing--much more important than whether you choose to follow convention.

3. ADDENDUM:

Even though it's not part of Angie's question, the title raise the different question of keeping track of rows as you knit them.

There are lots of ways to keep track. Clickers of various kinds  are popular. Also popular: pencil and paper. Some make hash marks on a blank page, some make Excel spreadsheets with little boxes to check off. There is the box-and-circle method for cables, and chart-charts for lace. Whether the row should be noted BEFORE starting or AFTER finishing is up to you. Again, consistency is key. 

Whatever way you keep track, however, the one certainty is that you will lose track. The phone will ring, your kid will crash into something, your city council rep will ring the doorbell. This is why "reading" the fabric, as Angie wants to do, is your best insurance policy.


--TK
(You have been reading TECHknitting on: How to count rows)

A very nearly invisible increase

Here is an increase which is as invisible as any increase can well be--the sort of increase you would do in the middle of a field of stockinette, should you ever need to do such a thing.
Step 1 (above): The green stitch is the next stitch on the left needle, the red stitch is the stitch under that. The blue yarn is the yarn of the current row--called the running yarn.

* * *

Step 2 (above): Insert the head of the right needle into the red stitch as shown.

* * *

Step 3 (above): Place the head of the red stitch on the left needle--arrange it untwisted, with the right arm forward.

* * *

Step 4 (above): With the running yarn (blue) knit the red stitch AND the green stitch.

That's it. Neat, huh?

--TECHknitter

PS:  There has been some confusion between the nearly invisible increase which ADDS a stitch to your fabric (this post above) and "knitting into the stitch below" which is a knitting trick to make a thick and puffy fabric but which does NOT ADD a stitch.  It is true that both of these techniques involve the stitch below, but they are not the same thing and confusing one for the other will cause no end of problems in trying to follow a pattern!
(You have been reading TECHknitting on: Invisible increases)

QUICKTIP: 2 kinds of sewing needles

After watching various knitters over the past several weeks stuggling to sew seams, or to work in ends, here's a TECHknitting QUICKTIP.

There are two kinds of long-eyed sewing needles which knitters are likely to meet: dull and sharp. The smaller dull ones are properly called "tapestry" needles and the larger dull ones are called "darners," while the sharp ones in all sizes are called "embroidery" or "crewel" needles.

Dull needles are used when you don't want to pierce your yarn, such as when you want to seam together the pieces of a sweater, or create duplicate stitch embroidery on the surface of a knitted fabric. LaurieM (a reader of this blog) points out in the comments that dull needles are also best for the kind of Kitchener stitch done with a sewing needle. (Thanks LaurieM!) Sharp needles are used when you do want to pierce your yarn, such as when you want to work in ends, or embroider through a thickness of knitted fabric.

Using the wrong kind of needle for the wrong kind of work will only slow things down and make you unhappy.

Addendum, December 2011:  While it is true that using the wrong kind of needle will make you crazy, here's a brand new tip from Patti in Canada--a reader who wrote in with a swell idea to avoid the need for needle switching.

--TECHknitter

Multi color knitting, 1 color at a time: slipped stitch patterns

We've already talked some about multi-color knitting created one color at a time--a kind of knitting called multiple pass knitting. Now we're turning to the second category of one-color-at-a-time color knitting--SLIPPED STITCH patterns.

Slipped stitch patterns come in two flavors. First, simple slipped stitch. This kind mostly has a certain amount of contrast color and generous amount of the main color. The second kind are more complex patterns, often called "mosaic knitting." Complex patterns generally have roughly equal amounts of both colors.

click picture

SIMPLE SLIPPED STITCH color knitting:

A couple of decades ago, my mom made a multi-colored vest. While gearing up to write this series on color knitting, I dug it out. Mom never learned to knit with two colors at the same time, so I was curious how she'd made it. Looking carefully, that vest was made using a slip-stitch pattern--stitches from the row below (and sometimes, 2 rows below) were slipped up into the current row and left there. This created rows with two colors, although only one color was ever knitted at a time.

Below is a charted example: in this chart, row 4 is to be made by knitting the stitches shown in blue, and slipping the pink stitches indicated by the red arrows.

click picture

Step 1 of this technique involves first knitting a blue stitch, then slipping a pink stitch, then knitting a blue stitch, and so on, down the line. This is the result on the needle: the slipped pink stitches are marked with a red dot. (Below.)

click picture

Step 2: On the following row (row 5) all the stitches, both pink slipped and blue unslipped, are simply knitted. The slipped pink stitches (marked by a red dot) remain in the fabric in their slipped positions. (Below.)

click picture

* * *

Simple slipped stitch patterns are probably the easiest of all methods for creating colored knitting. However, they're nothing to sniff at. As the French philosopher Descartes implied (commentary to his third rule) when something is fine just as it is -- simple and evident -- it need not be wrapped in complications to make it seem more desirable and important.

See for yourself: this illustrations shows an super-simple slipped stitch pattern; next to it is the quite gorgeous fabric it makes.

One thing: slipping stitches distorts the fabric (bunch it up, lengthwise), so these fabrics are denser than regular one-color knitting -- sometimes a LOT denser. Good for boxy winter garments, not so good for fitted summer clothes.

One more thing to take into account: if you want to make two color slipped stitch fabrics working back-and-forth, it will sometimes happen that your two colors of yarn will wind up on opposite edges of the fabric. This is more of a surprise than a problem--the solution is laid out in the green paragraphs about "out of phase yarns" in this post (scroll down for the green text).

COMPLEX SLIPPED STITCH color knitting:

The simple slipped stitch fabrics illustrated above usually involve slipping a few contrast stitches over a ground of main color. Complex slipped stitch patterns are made the same way--by slipping stitches of one color on the first pass, or the first several passes, then knitting these slipped stitches on a future row. However complex patterns differ from simple patterns:

• they are generally geometric
• they generally feature rather equal amounts of both colors
• the stitches are more frequently (but not always) slipped over more than one row.

Complex slipped stitch patterns knitted in motifs are often called "mosaic knitting" and their most famous proponent is Barbara Walker. Ms. Walker's book by that name was recently re-issued by Schoolhouse Press, (Thanks, Schoolhouse!)

Mosaic knitting--whether in motifs or in all-over fabric--creates a firm, not very stretchy fabric, more like fabric woven on a loom than fabric created with knitting needles. (This is because the high number of slipped stitches take most of the "reserve" out of the normally loopy knitted stitches--more info at this link.)

All-over mosaic fabrics; heck, any mosaics, have a retro look. They are rather thick and heavy -- best for outerwear or sleeveless garments. How 'bout this dapper gent's vest pattern from Vintage Purls? (VP, posting from Kiwiland--New Zealand --collects vintage patterns and puts them on the web for free. Thanks VP!) How 'bout those colors in the fabric sample knitted from the pattern? 70's appliances, no?

Heads up: sock patterns are sometimes written in mosaic patterns, but even in thin yarn, they'd be pretty stiff and thick--more hiking than dress up.

--TECHknitter (You have been reading TECHknitting on: Slipped stitch color knitting)

QUICKTIP: How to see if socks will fit without trying them on

On mother's day, I will channel one of my own mother's tricks for you--a trick for figuring out whether socks will fit without actually trying them on. It works on the principle that people's hands and feet are in proportion.

Top photo (opposite)
Have the sock's Intended Wearer (IW) clasp the toe of the sock between thumb and hand- grasping as little of the toe as possible.

Bottom photo (opposite) Make a fist, then wrap the sock all way around the hand. You are aiming to get a foot length so that the heel will slightly overlap the toe.


If the heel does slightly overlap the toe, the sock will fit that person.

It is true that when in the process of knitting socks, there is not yet a toe to clasp (or, if making them toe up, there is not yet a heel to measure against.) Nevertheless, you can adapt this principle to "try on" socks without sticking your (or another's) feet into a nest of sharp and poking dpn's. The thing to do is to "guesstimate" based on having the IW clutch the sock by the needles, then wrap the already knitted part of the foot around the IW's fist. Don't forget to factor in the toe (or heel) length. The size of the gap reveals the amount of foot still left to knit.

This is also a great trick for "trying out" gift socks without revealing what you are making--have the IW shut their eyes (no peeking) and wrap away--if the IW thinks anything, they will think you are knitting them mittens.

A mother's day thought: trying on mystery garments is very intriguing to little kids--they love the drama of "no peeking!" I fondly remember my mom and grandmom doing mystery try-ons for my sister and me--mostly dresses, but sometimes knitted garments--it is one of my favorite childhood memories. Afterwards, my sister and I would speculate on what those garments could possibly be...

--TECHknitter
(You have been reading TECHknitting on: making socks that fit.)

Multi-color knitting, one color at time: multiple-pass color knitting

Four-color knitting

Today, it's goodbye to complicated color knitting techniques like two-fisted two-color knitting or two colors on one hand + a third color on the other hand. Instead, a MUCH EASIER color-knitting technique which nevertheless lets you knit a LOT of colors in any one row. 

Today's trick needs no skills other than ordinary knitting. Any color pattern, regardless how complicated requires only a basic knowledge of stockinette fabric + PATIENCE.

It is called...

Multi color knitting, one color at a time

There are two kinds of multi-color knitting, created one color at a time. The first kind is called multiple pass color knitting -- today's post. The second kind is called slipped stitch color patterns, or sometimes "mosaic" patterns, and those are tackled here.

MULTIPLE PASS KNITTING

Multiple pass knitting creates "ordinary" color patterns which don't have any slipped stitches in the final result. From the back, it looks exactly like stranded knitting. Just to confuse you, multiple-pass knitting requires slipping stitches during the construction phase. However, no slipped stitches remain in the finished fabric.

This trick is just regular knitting (and perhaps, purling) with whichever method you like best (continental or English). The basic idea is to work multiple passes through each row--two passes (once with each color) for two color knitting, three passes for three color knitting, etc. 

Upside: no need to learn a new technique. 

Downside: it's S-L-O-W.

The example below shows a simple two-color, one-row pattern, but once you understand the example, multi-colors spread over multiple rows (as in the opening photo) are worked the same way.

click picture

Two color knitting is accomplished in two passes through row 4--the only multi-colored row of this particular pattern. In other words, row 4 will be constructed in two passes--

fhe first pass lays down row 4's blue stitches, 

the second pass lays down row 4's pink stitches.

click picture

(Above) There are three pink rows already knit on the double-pointed needle (dpn).  Multiple-pass knitting must be done on some sort of two-pointed needle: a circular or dpn. Needles with knobs simply won't work. To start off, we'll always knit on the smooth face of the fabric (the "right" or "knit" side), and that side faces out in the picture.

click picture

(Above--step 1) On the first pass-through, KNIT every stitch of the first color (in this example, the blue) and SLIP up from row 3, every stitch which is to be knitted in the second color (pink).

"Slip up from row 3," means that when you get to a stitch which is not supposed to be  blue, you simply slip that stitch from your left needle to your right needle, without knitting it, AND without twisting it--it is slipped "open" or purlwise.)

At the end of this first pass-through, the row is only half-knitted.

For the second pass-through: if you are working flat (back and forth) on double pointed needles (dpn's) or back and forth on circular needles,  push the whole work back along the needle and start again with the right side facing you--no need to purl back.

 If you are working a tube with dpn's or circular needles, you simply go around on the face of the fabric again, this time using the other color.

click picture

(Above--step 2) On this second step (the second pass through row 4) you use the second color (pink) to KNIT every stitch you previously slipped on the first pass, and SLIP every stitch of the first color (blue) which you previously knit on the first pass. 

At the end of steps 1 and 2 you have knit an entire row with two colors, using only one color at a time. After step 1, the blue stitches will have been knitted, after step 2, the blue and the pink stitches will have knitted.

At the end of two passes, this 2-color pattern is done. NO stitch remains in the slipped position--if any stitch remains in the slipped position, you haven't done this technique right (although you have, perhaps, independently discovered 2-color slipped stitch patterns!)

For more colors, this basic technique requires one pass for each color.

pass 1 slips every stitch except those meant to be knit in color 1.

pass 2 slips every stitch except those meant to be knit in color 2

pass 3 slips every stitch except those meant to be knit in color 3

pass 4 slips every stitch except those meant to be knit in color 4.

The more colors, the lumpier the fabric gets with all those floats on the back, so four passes approach the practical limit. 

Circular knitting, flat knitting and out-of-phase yarns.

For a first project, it's easier to work a tube on circular needles or dpn's. This is because a tube made in multiple-pass color knitting, like all tubes, requires working only on the knit face of the fabric--no need to to turn the fabric and purl back. The second pass through the same row in multiple-pass knitting requires only that you switch to the next color of yarn and work your way around the tube again to the starting point (indicated, hopefully, with a stitch marker!)

If you ARE making a tube (circular knitting), skip down to "tension." For flat knitting, though, you have to slog through further explanation.

In flat knitting (working back-and forth on double pointed needles or circular needles), a strange situation arises. The yarns get "out of phase," they wind up on opposite edges of the fabric.

In the color pattern of the example (first illustration above) there are 4 rows of knitting. Rows 1, 2 and 3 are all pink, row 4 is the color-knitting row. At the end of one repetition of our 4 row pattern, both the yarns (pink and blue) are at the left, "ready-to-purl" edge of the fabric.

In flat (back and forth) knitting, the second set of 4 rows will go like this: Row 1 is all pink--and you'll purl back. Row 2 is all pink, and you'll knit. Row 3 is all pink and you'll purl, Row 4 is color knitting, and is a little confusing as to whether you knit or purl, because your blue yarn is on the left edge of the fabric where you parked it after the first repetition of the pattern--it is on the "ready to purl" side. However, the pink yarn, which has been worked an additional three rows, is on the right edge of the fabric--the "ready to knit side." In other words, the yarns are at opposite edges of the fabric! They are out of phase with one another.

However, as odd as this is, it's more a mental challenge than a structural issue. 

Multiple-pass color knitting lets you lay down the colors independent of one another. Therefore, on this first half of row 4, you first PURL in blue, and SLIP every non-blue stitch from the purl side. Be sure to hold the float yarn (the "tail" loops connecting the blue stitches) on the purl side of the fabric--the side facing you, and be sure to slip the loops of the slipped stitches "open" (untwisted--purlwise). When you finish the row, your yarns will be at the same edge, and you'll now create the second half of row 4 by KNITTING the just-slipped stitches in pink, while SLIPPING every blue stitch "open" (purlwise). 

Bottom line: because the yarns are laid down independently, it does not matter if you have to create the passes of knitting from opposite edges of the fabric. "Out of phase" does not affect the fabric.

Tension and floats

As with any other kind of two-color knitting, the floats (strands behind) have to stretch far enough so the fabric doesn't pucker. This is actually easier with this sort of color knitting than with any other t because you're not wrangling two yarns at the same time. Just be sure to S-T-R-E-T-C-H the slipped stitches all the way out along the right needle before knitting (or purling) the new color--if you bunch up the slipped stitches on the right needle, the float will be too short when the formerly bunched-up stitches come off the right needle and spread out. As with any other kind of color knitting, it is best to avoid floats which exceed 5-6 stitches. (For more background information on color knitting, click here.)

_____

Addendum, November 2015:  Poking around on the internet, I found a You-Tube video from a lady named Eliza, who evidently independently "unvented" multiple-pass knitting. Her you-tube has a good approach to the tension issue, and that is, using yarn overs to put slack where you need it. So, if stretching the slipped stitches isn't giving you the slack you need, have a look at this video, and see if you like the YO idea.

______

Color dominance

Lay down the same color first, regardless whether knitting or purling. This sets up the yarn to approach the fabric from the same angle, meaning, they maintain their relative positions when entering the fabric from the back side, one above, one below. 

Fancy it up: combining multiple-pass knitting with two-fisted knitting

If you already know two-fisted two-color knitting, you can use this trick when you get to more colors. The opening photo shows a four-color fabric.  Because I how to knit in two colors holding one color in each hand, laying down four colors took me TWO passes instead of four: the first pass was two-color knitting + slipping, the second pass was slipping whatever was knit the first pass + two-color knitting the remaining stitches. 

Reading the fabric vs. memorizing the pattern

The only really hard thing about multiple pass knitting is keeping track of where you are. "Reading" the knitting by looking at the row below gets confusing because it's hard to tell slipped stitches from knit ones. Chanting the pattern to yourself is helpful--2 pinks, slip 2, 2 pinks, slip 2, 2 greens, slip 2, 1 green, slip 2...2 pinks, slip 2, 2 pinks, slip 2, 2 greens, slip 2, 1 green, slip 2...

The color pattern in the opening illustration was adapted from the book "Knitted Tams" by Mary Rowe.

--TK

An easier way to Kitchener Stitch (also called "grafting seams" or "weaving seams")

includes a how-to
click picture
Lord Kitchener, a British general, was concerned about the state of his men's feet--their sock seams rubbed their toes bloody. Accordingly, he invented (or more likely, IMHO, he had an expert knitter invent, and then took the credit for) a way to finish off socks smoothly. This toe-ending maneuver is now called the Kitchener stitch. Other names for this maneuver are: "weaving" or "grafting" seams.

Kitchener stitch makes a very lovely ending--a sort of optical illusion that the knitting just kept going "around the corner." Without the red yarn picking out the weaving for you to follow (little picture) the seam in this sock toe would be completely invisible (big picture). Kitchener stitching is most often used for sock toes, but is sometimes used to graft other "live edges" together.   Have a look at this high-fashion garment which uses large amounts to Kitchener stitching to close the long seams at the top of dolman sleeves.

Now, the thing about Kitchener stitch is that it is usually done with a tapestry needle and a length of yarn, and typically terrifies knitters, being considered an "expert" skill. The needle goes in and out of the live stitches, following the complicated path that a row of knitting would take, and this accounts for the invisibility of the seam--the fabric is actually grafted together with a seam which is structurally identical to the fabric--in fact, Kitchener stitch is a form of duplicate stitch, when you get right down to it.

click picture

MAKING IT EASIER

For some time, I have been nursing the theory that maybe the reason why some knitters avoid Kitchener stitch is because it is actually a species of sewing. It is my theory that if it you didn't have to dig out a tapestry needle -- if it could be done with knitting needles -- Kitchener-o-phobic knitters might find it more attractive.

After a bit of messing around, this new unvention has emerged--a way to graft seams shut with knitting needles. This TECH-unvention is now ready to spring upon the world.

This post asks you, dear readers, to fill the role of guinea pigs. My fellow blogger, kmkat, was the first guinea pig--she graciously volunteered to be a test-knitter before this post was ever published, and she found that the instructions worked for her. Now, perhaps you will try these instructions out for yourself and see whether you like this new method.

Like the traditional sewing method, this new way is still done with a length of yarn pulled through the loops, but the "stitches" are real knitting stitches (knit and purl) not sewing stitches, and the work is done only with knitting needles--you can leave the tapestry needle in the cross-stitch kit, where it belongs.

SET UP

click picture

When you have finished the toe of a sock, you must set up your work as follows: arrange all the front (instep) stitches on one double pointed needle, and all the back (sole) stitches on another double pointed needle--in the instructions which follow, these two needles are called the left needles, both front and rear. The yarn should be coming out of the last stitch on the rear needle--in other words, by the right hand end of the rear left needle, as illustrated above.

For a typical sock toe, about 15 inches of yarn will be more than enough--cut the yarn to that length. This 15 inch length of yarn (illustrated in red, above) is the "working yarn." The work is actually done by manipulating this working yarn, using a third double pointed needle, the "right-" or "working needle." To complete your set-up, you must take this working needle into your right hand, while holding the two left needles in your left hand.

A final note before beginning: Although this method is done with knitting needles, it is different than knitting because it is done with a CUT LENGTH OF YARN--which we are calling the "working yarn." Instead of making endless loops, you are going to do something unusual with your knitting needle--you are going to use it to draw the working yarn ALL THE WAY THROUGH each loop each time. If you look at the illustrations below, you will see that the working yarn (red) passes AS A SINGLE STRAND, through the stitch being worked. In other words, with each of the 4 steps listed below, the working yarn is to be pulled all the way through the stitch until the end of the working yarn has popped free, as illustrated.

HOW TO KITCHENER STITCH with
KNITTING NEEDLES

Step 1:

click picture

Wrap (bring) the working yarn around to the front of the work.  NOTE that the working yarn passes UNDER the two left needles, and UNDER the right working needle.  Insert the right working needle into the first stitch (green) on the left front needle, and use the working yarn to PURL this first stitch. Draw the working yarn backwards (away from you) all the way through this stitch until the end of the working yarn pops free. The loose end of the working yarn (red) will now be in the area between the left needles. The stitch (green) which you were working is now fully bound off.  Push this stitch off the left front needle.

Step 2:

click picture

The working yarn should now be in the area between the left front and left rear needles. Insert the right working needle into the next stitch (purple)--which is the second stitch on the left front needle. Use the working yarn to KNIT this stitch. Draw the working yarn forward (towards you) all the way through this stitch until the end of the working yarn pops free of the stitch. The loose end of the working yarn (red) will now be in the front of the work. The stitch (purple) you were working on is only half bound off--you must leave this stitch on the left front needle.

Step 3:

click picture

Wrap the working yarn around to the back of the work. NOTE that the working yarn again passes UNDER all the needles on its trip to the back of the work.  Insert the right working needle into first stitch on the left rear needle (blue) and use the working yarn to KNIT this stitch. Draw working yarn forward all the way through this stitch until the end of the working yarn pops free. The loose end of the working yarn (red) will now be in the area between the two left needles. The stitch (blue) you were working is fully bound off--push this stitch off the left rear needle.

Step 4:

click picture

The working yarn should be in the area between the left front and left rear needles. Insert the right working needle into the second stitch on the left rear needle (teal) and use the working yarn to PURL this stitch. Draw the working yarn backwards all the way through this stitch until the end of the working yarn pops free. The loose end of the working yarn (red) will now be at the back of the work. The stitch (teal) you were working is only half bound off--you must leave this stitch on the left rear needle.

These four steps are repeated again and again to create a Kitchener stitched seam. If you want to chant the steps to yourself as you work, here is the mantra:

• Step 1: Purl front, push the stitch off
  
• Step 2: Knit front, leave the stitch on
  
• Step 3: Knit rear, push the stitch off
  
• Step 4: Purl rear, leave the stitch on
  

(When my kids hear me chanting like this, they know to stay away until the muttering ceases.)

TENSION and SPEED

Resist the temptation to give the yarn a good yank as you pull through. Instead be mild in your adjustment. With no needle around which to form your stitch, yanking will cause over tightening.

Each set of 4 steps only re-creates what amounts to 1 knit stitch. Even if you could do this as fast as actual knitting (which you can't) it would take four times as long. Progress seems glacial. Persevere, however, and you will have lovely toes (or at least, your socks will).

__________

Related post: Grafting in purl using knitting stitches and a knitting needle (An easier way to Kitchener stitch, part 2).

___________

--TECHknitter 

  You have been reading TECHknitting on: A new way to Kitchener stitch, also called "grafting seams" and "weaving seams."