Button holes in hand knitting, part 1: Lore and tradition plus some nifty tips

This is the first post in a multi-post series on buttonholes.*  Some of this material has appeared in print in Interweave Knits, some of it is brand new. This first post covers the lore and tradition of buttonholes, as well as offering some nifty general tips. 

Which side? 
Tradition puts men’s buttons on the right band and buttonholes on the left, with women’s clothing opposite: buttons left, buttonholes right. Do you wonder why? At certain periods in history, women’s clothing became so elaborate, assistance was required in dressing. Buttonholes on the right are easier for a right-handed assistant facing the wearer (although not for the wearer herself!)

Girl? Boy? Don’t know? 
If gender traditions are important for you, here's a nifty trick. For baby sweaters, make buttonholes on both sides, but leave off the buttons.After the birth, sew the buttons on over the “wrong-side” buttonholes. This closes the unneeded buttonholes, yet permits switching for a future sibling of different gender.

Perfect spacing, no math
Cut a piece of sturdy no-stretch string about 1 inch shorter (for really big buttons, maybe 2” shorter) than the proposed button band. Determine desired number of buttons, then subtract 1 from that number and fold the string into that number of sections. Example: for 5 total buttons, 5-1=4, so fold the string into 4 equal sections. Mark each of the three resulting folds with a pin. Straighten the string. The top and bottom button are to be centered on the very ends of the string, and the intervening three buttons are to be centered on each pin in the string segment. Measure each string segment to figure out how many inches of band to allow between the holes. If using vertical buttonholes, remember that the pin shows the buttonhole center, not bottom so start the actual buttonhole accordingly.

Horizontal or vertical? 
Ever wonder why some sweaters have top and bottom buttonholes horizontal, and intermediate buttonholes vertical? Horizontal buttonholes prevent vertical slippage, keeping bands aligned top and bottom.Vertical buttonholes prevent horizontal slippage, keeping the bands centered on one another. This two-way alignment is found on high-end sweaters, and adds a touch of class to hand-knit sweaters, too. A further refinement: Horizontal buttonholes are worked so the outer edge not the center of the buttonhole!) is centered on the buttonhole band. Why? When wearing, the button pulls to the outside of the slot. This off-center placement keeps the bands aligned.

Buttonholes and their bands
Buttonhole bands and button bands are best made in a non-curling fabric (i.e.: NOT stockinette). Horizontal buttonholes work well in a row-structured (horizontal) fabric, such as garter stitch, while vertical buttonholes work well in a column structured (vertical) fabric, such as ribbing.For two-way alignment, something’s got to give, so swatch it out both ways and see whether you prefer horizontal holes in a vertical fabric or vice-versa.

--TK

______

*(Posts in this series)
.Buttonholes in hand knitting, part 1: lore and tradition plus some nifty tricks 

.Buttonholes in hand knitting, part 2: Button lore 

.Buttonholes in Hand knitting, part 3: Sheepseye aka yarn-over buttonholes.

.Buttonholes in hand kniting, part 4: Vertical buttonholes

.Buttonholes in Hand knitting, part 5: Horizontal and Tulips buttonhole, with diagrams

.Buttonholes in Hand knitting, part 6: "Oops! I forgot a buttonhole!" 

 (Related posts)

.Buttonhole alternatives

.How to sew on a button without the spacer sandwich

.Tulips buttonhole: the video (and an interview on Knitting Daily)

Spice Road Cap: a TECHknitting pattern

Pattern cover (click to enlarge)

The spice road--stretching from China, through central Asia to easternmost Europe-- defined the route precious spices and silks traveled from east to west. The headgear along the road varies from the fur headgear of the steppes to the brimmed hats of central Asia to the turbans of the southern fringe. The Spice Road Cap captures this variety. A wide flat sweep rises over the forehead, a little foldover brim runs around the top and an organic back fold brings turbans to mind.

Spice Road cap

The cap is knit flat in a fan shape then bound off and folded. There is no needle-and-thread sewing.  Instead, the back seams are three-needle bind offs, and the bottom brim is picked up and knit on. Short rows and slip stitching are used in the shaping, and the pattern contains tutorials for these.

Spice Road fits close to the head at the ears.  Yet, there is positive ease above the ears caused by the unique brim shaping, so a high bun would fit. The cap folds up small and would be easy to take along in a pocket or handbag until needed.

Spice Road takes just under 100 grams of worsted weight wool.  Knit at a gauge of 5 st/in and 7 rows/inch, the cap requires a 30 inch or longer circular needle of the size you require to get gauge.  A second, 16" long circular needle two sizes smaller is required for the bind off and the lower brim, and a crochet hook is required for the slip-stitching and picking up stitches. One size fits most, and the finished diameter can be customized by the number of stitches picked up for the lower, curled, brim.

There are two ways to purchase this pattern
1. Go to the Ravelry page for this cap
2. Purchase now--with this button --->

Good knitting, and I hope you will like the cap--both knitting it and wearing it.
--TK

PS:  Thanks to the test knitters!

Sweater shoulders: transform stair steps to short rows and radically improve shoulder shaping

4 illustrations, click any illustration to enlarge
Sometimes, a sweater pattern will have you cast off your sweater shoulders in "stair steps."  For a sweater worked in stockinette stitch, the directions might look something like this:

• 16 sts on needle.  Purl to outer edge of shoulder.  Turn work. Knit side facing
• Using ordinary chain bind off, bind off 5 sts.  Knit remaining 11 sts.  Turn work.
• Purl 11 sts.  Turn work
• Bind off 5 sts. Knit remaining 6 sts. Turn work.
• Purl 6 sts.  Turn work.
• Bind off remaining 6 stitches.  Shoulder bind off completed. 

In real life, these directions are going to get you the fabric illustrated below, with the bind off shown in DARK GREEN. 

Stair-step shoulders (bind off in dark green)

As you can see, this method of bind off creates "stair steps" at the top of the shoulder.  When you come to connect the shoulders to one another at the sweater top, this jagged fabric is difficult to sew up nicely.

How about if we use short rows instead?  Instead of that jagged edge, we'll make a lovely smooth shoulder top--a top which will be a pleasure to sew up when the time comes.

Before we begin, if you're a little rusty on short rows, you might wish to consider reviewing these illustrated posts:

• Short rows: theory
• Short rows: method

The particular kind of short rows we are going to use for the shoulders are a mash up of ordinary wrap-and-turn short rows and Japanese short rows--we'll steal the wrapping and turning from the former and the slip stitching from the latter.

If all this sounds WAY complicated, hang on!!  This really is far easier than it sounds so far, I promise!   Even if short rows seem scary, it'll all come clear when we take this step by step. (You might even want to cast on a 16 st swatch and follow along.)

• Step 1. 16 sts on needle.  Knit to within 5 sts of outer edge of shoulder.   You will now have 5 sts on your left needle and 11 on your right. 
• Step 2. slip the stitch on the tip of the left needle (shown in PURPLE below) onto right needle.  (Slip this and all other slipped stitches "purlwise," which means slip the stitch from one needle to the other without changing the stitch mount--the RIGHT arm of the stitch should remain the forward arm.) Draw running yarn forward, slip purple st back onto left needle, draw running yarn to back again.  The running yarn has been turned into a "wrap" around the purple stitch.  The wrap is shown in RED, below.   Continuing to hold the running yarn in the back, slip the st on the tip of the right needle (shown in ORANGE, below) to the tip of the left needle.  You now have 6 sts on the left needle, and 10 sts on the right needle, as shown below.

Wrap the purple stitch with the red running yarn as described
above and then slip the orange stitch

Here is a closeup of the wrap and slip detail.

Close up

• Turn work, purl the remaining 10 sts.
• Turn work again and knit 6 sts.  
• Repeat step 2, except that when you finish wrapping the purple st and slipping the orange stitch, this time, you will have 11 sts on the left needle and 5 on the right.
• Turn work and purl these 5 stitches.
• You will now have all 16 sts on one needle and you'll end up on the neck edge of the shoulder.
• You will now knit across the entire shoulder top from neck edge to outside edge, all 16 sts, as shown by the DARK GREEN stitches below.  As you come to each wrap, fish around with your needles and "unwrap" the red wrap from around the neck of the purple stitch, placing the wrap on the tip of the left needle.  Then, k2tog the red wrap together with the purple st.  The TURQUOISE stitches along the top row in the below illustration  show where these two were knit together.  

In real life, these directions would get you the fabric below.  If you compare the final row (DARK GREEN) to the bind off in the first illustration above, you can see that the short row method yields a single smooth descent along the shoulder line: the jagged steps have been eliminated. 

Stair steps eliminated via short rows

You can now attach this shoulder to its mate by a three needle bind off, or you could bind it off via ordinary chain bind off on the next row, then sew the shoulders shut.  

PS:  Geek note:  If you intend to bind off anyway, you could just as well bind off the DARK GREEN stitches the last row.  In other words, that last row could have been worked as an ordinary chain bind off as it was made, instead of working this row and then working the bind off on the following row.

Good knitting, TK

Fixing a run in garter or seed stitch

If you get a run in garter or seed stitch, it is easy to fix, as long as you keep your wits about you. (And if you already know how to do this, scroll to the bottom of this post for two shortcuts.)

Garter stitch, seed stitch
Garter stitch and seed stitch don't look much alike.  Yet if you go up a column in either fabric, you'll discover that column-wise, both have the same identical structure:  a stack of alternating knits and purls.

Row-wise, the fabrics differ--in garter stitch, every stitch along a row is the same, while in seed stitch, the rows alternate just like the columns: alternating knits and purls.

The upshot of this is that, although we have to establish the foundation stitch of any run-out column opposite-wise in each fabric, yet once we get started, we can fix single-column runs in each fabric by the exact same method, since column-wise they are identical.

Establishing the foundation stitch
Before we get started on the actual process, there is going to be a LOT of confusion if we lose sight of a home-truth about knitting:

• a loop waiting to be worked is neither a purl nor a knit.  

That's right.  A loop just sitting there has the capacity to be either a knit OR a purl. It is not until a second loop is DRAWN THROUGH IT on the following row that the loop becomes transformed--frozen into position as a knit or a purl stitch.  (If this confuses you, you might want to consider reviewing this post.)

A loop sitting at the bottom of a run-out ladder shares this characteristic.  It is neither a knit nor a purl...yet!  It is not until we draw the next ladder rung through that bottom loop that the loop becomes transformed into a knit or a purl stitch.

Another important thing to remember about stitches is that knit stitches have their heads popped onto the BACK of the fabric, while purl stitches have their heads popped onto the FRONT of the fabric.  Stated otherwise, it does not really matter what lays at the foot of any loop.  It is the top of the loop--its head, which determines whether a stitch is a knit or a purl. (For further information about head orientation, consider reviewing this post.)

The consequence of all this is as follows.  The first step for correcting a run in garter stitch or in seed stitch is examine the two stitches immediately neighboring the lowest loop of the run out column, in order to determine whether the lowest loop ought to be transformed into a knit or a purl.  As this relates to the diagram, you can see that we are working in garter stitch, because in garter stitch, each stitch along any one row is the same as its neighbors.  The orange loop sitting forlornly at the bottom of the ladder has two immediate neighbors which are knit stitches (dark green), and this lets us know that it, too, must be transformed into that same kind of stitch--a knit stitch.

(By contrast, if the fabric were seed stitch, the fact of two dark-green neighbor knit stitches would mean that the orange loop ought to be transformed into the opposite of its neighbors--a purl stitch.)

This is a garter stitch fabric--every stitch in any row
is the same type as its neighboring stitches.  Therefore,
the orange loop at the bottom of the run must be
transformed into a knit stitch, so that it is same type
of stitch as its two neighboring stitches
(dark green), which are knit stitches.  (You can tell
that the two dark green stitches are knit stitches
by the fact that their heads are popped onto the
back of the knit fabric.)

Here's how to transform a loop into a knit stitch
Slip the stitches on the knitting needles along, transferring them from one needle to another as necessary until the run is between the needles, as shown in the diagram.  To transform a loop into a knit stitch, hold a crochet hook on the FRONT of the fabric.  Insert the hook into the lowest loop (orange) from front to back, as shown.  Next, reach up and hook the next rung of the ladder (purple).  Draw the purple rung through the orange loop.  Given the direction of insertion, the act of drawing through the purple ladder will pop the head of the orange loop to the back of the fabric, leaving the arms aligned on the front in a sort of a little "v."  In this way, you have transformed the bottom loop of the ladder into a knit.  At the same time, the rung doing the transforming--the purple rung which was drawn through--becomes the loop at the bottom of the run, waiting in its turn to be transformed from a loop to a stitch.

Insert crochet hook into the orange loop from
the front, then draw through the next rung on the
ladder (purple).  This not only transforms the orange
loop into a knit stitch, but also turns the purple
rung into the next bottom loop, waiting in its
 turn to be transformed from a loop into a stitch

Here's how to work a loop as a purl stitch
In our garter stitch diagram, we started with an orange loop which had to be worked as a knit. As stated previously, garter and seed stitch runs are corrected by creating an alternating stack of knit and purl stitches. Therefore, we know that the next loop after a knit stitch has to be transformed into a purl stitch. So, the next step is to draw through the following rung (brown) in the opposite direction--to work it from back to front, thus transforming the purple loop into a purl.

We can double-check that this is correct because in a garter stitch fabric, the bottom loop is to be transformed into the same sort of stitch as its two immediate neighbors, and these stitches (now colored pink) are both purls--their heads are popped to the front of the fabric. Therefore, the brown rung must be drawn through the purple loop in such a manner as to transform the purple loop into a purl stitch.

(Again, if the fabric were seed stitch, the fact of two pink neighbor purl stitches would mean that the purple loop ought to be transformed into the opposite of its neighbor stitches--a knit stitch.)

Specifically, whenever you need to work a loop at the bottom of a ladder as a purl, here's how: Insert the crochet hook from the back of the fabric, through the purple loop, from back to front, as shown. Then, draw through the next ladder loop (brown), working from back to front.

Insert crochet hook into the purple loop from
the back, then draw through the next rung on the
ladder (brown).  This not only transforms the purple
loop into a purl stitch, but also turns the brown
rung into the next bottom loop, waiting in its
 turn to be transformed from a loop into a stitch

Summary:
To transform a loop into a KNIT stitch, insert the crochet hook into the loop from the FRONT and draw through the next ladder rung from that position.  To transform a loop into a PURL stitch, insert the crochet hook from the BACK and draw through the next ladder rung from that position (but keep reading down to shortcuts for an easier way!)


Repeating the process
Keep repeating this process, moving the crochet hook to opposite faces of the fabric and drawing the next ladder rung through the loop below. To get the crochet hook to the other side of the fabric, you've actually got to remove it from the loop you just drew up, pinch that loop with your fingers, put the hook on the other side of the fabric, and insert the hook into the loop you are pinching.

Once you have drawn up each new loop to alternate faces of the knit fabric, you will have created a column composed of a stack of alternating knits and purls, as shown in the last diagram, below.

final result: an alternating stack of knits and purls

Shortcuts
I have illustrated the process in the conceptually simplest manner, showing the work as if it were always to be seen from the same side of the fabric.  This is fine for a dropped stitch or two, and this orientation makes it easy to understand, I think. However, here are two shortcuts which make this process easier to work if you should happen to have more than a stitch or two to fix.

Shortcut 1--fabric flipping
Once you have gone through the pinching-neede-switching-and-inserting process two or three times, you will see that it really annoying to have to insert the crochet hook from the back.  Luckily, as we all know, the opposite of a purl is a knit.  Therefore, when it appears from the front of the fabric that the next stitch ought to be a purl, you will find that it is much easier to flip the fabric around front-to-back instead, so that you are always inserting the crochet hook into the bottom loop from the front, thus transforming the loop into a knit stitch.  The back of the knit is a purl, so all is well.

Shortcut 2--double ended hook or double-ended latch hook
After you have worked a few runs as for shortcut 1, you will discover that even though flipping so that you can always insert from the front is easier than trying to insert from the back, it is still quite annoying to have to continuously remove the crochet hook, only to have to insert it again once the fabric has been flipped.  It is at this point that you might wish to consider buying a double-ended crochet hook or a special kind of double-ended latch hook tool called a "seed-stitcher."

With a double-ended hook, you can do all the latching-up from the front.  This is done by sliding the needle from one end to the other, using opposite hooks alternately, for each stitch to be made.  Although this sounds very complicated, it isn't--once you get  hold of a double ended hook you will see how much easier this is. Here is a link to a video showing how to use a certain kind of double ended crochet hook called a "fix-a-stitch" and here is another  link to a you-tube video by the makers of the "seed-stitcher" double ended latch hook tool,  also showing how to do this.  The second video shows machine knitting being latched up, but the same technique is used for hand knitting.  At 24 seconds, you can see the seed stitcher being pushed through to its other end to make a purl stitch after a knit stitch, at 35 seconds, you can see the seed stitcher being pulled forward to make a knit stitch after a purl stitch. Both the double-ended crochet hook and the double-ended latch hook work in the same manner, although you might find the latch hook easier to use.

Good knitting, TK
PS:  Special thanks to Joan Schrouder who first clued me in to the seed stitcher tool.
You have been reading TECHknitting blog on fixing a run in garter stitch, fixing a run in seed stitch

Sharps and flats: sewing needles, part 2

Way back in May 2007, TECHknitting had a post on the two types of sewing needles: blunt pointed and sharp pointed.  The point (ha!) was that each kind has a different use.  Blunt points are best for such tasks as weaving, where you don't want to split the plies of the underlying yarn. Sharp points work well for splitting plies, good for such jobs as skimming in ends.

Although each type is good at what it does, the truth is that it can get rather tiresome having to switch back and forth, for example: first threading to a blunt point for weaving in an end, then rethreading to a sharp point to skim in the last nub of the tail.  The temptation is to skimp and just muddle through with whatever kind of needle comes to hand first.

Recently, Patti from Canada was reviewing this old post.  In response, she sent her own little trick to avoid needle switching.  Her e-mail reads as follows:

> If you need to use both kinds of needles, 
> it is easiest to thread onto a sharp needle, and 
> then just push it wrong way around
> (eye first instead of point first) 
> in those places you need the blunt point.
> Just be careful not to stab yourself.

What a swell idea!  No more muddling, no more skimping!

Weaving with a sharp needle held wrong way around

Close up

No need to rethread onto a sharp point
when the time comes for skimming in

Using a sharp needle backwards: really very clever! (And I will try not to stab myself.)  Thanks, Patti.

--TK

Pattern beta/test knitters

Dear readers: you are amazing.  Wow.  There have already been more responses than I can keep up with--so thank you very much. I'll leave this up for reference, but with the text crossed out. Hopefully, the pattern will soon be available, if the test knits work out.

Thanks again, and happy, happy new year. TK

ADDENDUM Feb 2012: The pattern has been test knit and is now available.

Lately, more patterns have been generated here at chezTECH.  The latest of these is a ladies' cap called "Spice Road."  It's a pretty neat pattern: it's knit flat in stockinette, all in one piece, utilizing a lot of short rows. Then, the fabric is folded, welted, seamed.


I named it that after the fabled spice road of old, because it has three design features found in central Asian headgear: a wide smooth expanse over the brow, a little brim which runs around the top, and a turban-like fold in the back.

One problem is making sure TECHknitting patterns are correct. Lately, I've been doing all the test knitting myself.  Yet, this is not a great idea. Because I know how the item ought to come out, I'm afraid I'd gloss over any error in the pattern.  Spice Road is, I think, ready for release, but I wonder if any my lovely TECHknitting readers out there would consider test knitting it first? The pattern is designed for intermediate knitters and above (but a bold advanced beginner could probably manage).


Here's the deal:  It would be great to have a three (or so) test knits. So, to those volunteers, I'll send the pattern as a PDF.  You buy the yarn or use up stash, and knit the cap by January 31, 2012.  Once you've gotten back to me with your comments, and once the cap is posted as a project on your Ravelry page, I will send you a $25.00 honorarium.  This will hopefully cover your yarn cost.


$25.00 for test knitting isn't a lot, and in an ideal world, it would be more, for sure.  However, in this non-ideal world, any money from the sale of the Spice Road cap pattern over and above the honoraria is instead slated to go towards snowpants, socks, boots and science club funds, all of which the local schools around here are finding in precious short supply.


Tech details:  a single 100 gram skein of worsted weight yarn will suffice. Common yarns in this weight include Cascade 220, Wool of the Andes, Northampton Valley Yarn, Pattons Classic wool, and the like.  The cap would best be made in wool--synthetics, especially "soft" synthetics,  may not have the body required for the details of this cap to work out. The gauge is 5 st/in, 7 rows/in, pretty standard for this weight of yarn. A circular needle 22" or longer is required for knitting stockinette back and forth at the required gauge (there are possibly too many sts on the needle at one time for a single-pointed needle to work). A 16" circular needle a size smaller is also required, as is a crochet hook of size proportional to the yarn. A steam iron will be handy for blocking.


Bottom line: if you are an intermediate knitter or above, if you are interested in being a test knitter for Spice Road ladies' cap, and if you can can afford to do so under these terms, write to me at the e-mail address under "profile," at the top of the right side bar. We'll work out the details to our mutual satisfaction, and then I'll send you the PDF pattern. And for everyone else, if the test knits work out, the pattern for the Spice Road cap will be for sale: this winter, hopefully.


Thanks for your consideration,
Best, TK

Three needle bind off (for real, this time)

A reader wrote to ask about the three needle bind-off.  (For the first TECHknitting 3-needle post published, I skipped a brain gear and got the illustrations actually backwards.  In this post, the error has--hopefully, anyhow--been eliminated.)

The three needle bind-off is a variant of the chain bind off  but with two major differences:

1. instead of drawing the running yarn through the one live stitch, you instead hold two pieces of fabric together and draw the running yarn through two live stitches: one from each fabric. 
2. working in this manner not only binds off both fabrics, but also connects them, thus creating a seam. 

Here's how it's done:

Each fabric is worked to the very top, then held with the live loops of the last row on its own needle.  Next, the fabrics are held together, front-to-front.  This orientation puts the seam you are creating on the inside of the garment.

In the below illustration, both fabrics to be connected are knit in stockinette, and the knit side of the fabric is meant to be seen when the garment is worn.  Accordingly, both fabrics are being held with their purl sides facing outwards, which means that their knit sides are rubbing against one another as the fabrics are being held front-to-front.

From the position of the knitter doing the seaming, the red fabric held in front shows its purl side, while the green fabric held behind shows the knit face--its purl face is showing outside on the back of the work. When the seam is finished, the fabric will be flipped open so that both knit sides show while the purl sides (and the seam) will be hidden inside the garment.

This trick is called the "three needle bind off" because, besides the two needles acting as holders for the live loops at the top of each fabric, a third needle does the actual work, as shown below.  Specifically, the third needle (silver) is inserted into BOTH first loops of the two fabrics.  You can see that the insertion is from front to back in the same way you'd insert if you were going to knit the next stitch.  The yarn doing the actual bind off--shown in blue--can be either a scrap of loose yarn, or the tail from one of the fabrics being seamed and bound off.

Using the third needle, the blue yarn is knit through both first loops, and both first loops just knit are dropped off.  Next, the third needle is again inserted into two loops, another stitch is knit with the blue yarn, and again, the two loops just knit are dropped off.  The below illustration shows two blue loops drawn through, as they rest on the working (right) needle, waiting for the bind off step. As you see, the blue loops pass through the top loops of both the red and the green fabric. 

The last step is to pass the first blue loop over the second.  This is done exactly as for the chain bind off discussed earlier.  Note that at any point in the process, there will always either be two loops on the right needle, which happens when the first loop is waiting to be drawn over the second, or there will be one loop on the right needle when, as below, the first loop has already been drawn over the second.

For a final illustration, here is an actual photo of a partially finished three-needle bind off, "in the wool."  The two shiny holder needles are being held upright, out of the way. The third--the grey working needle--has already been poked through the front (red) as well as the back (green) fabric, getting ready to catch up the next blue loop. Showing to the right is the blue chain of the seam being formed as the fabric-tops are chain bound off together.

To work the seam to completion, you would repeatedly work the insertion, the drawing up and the passing over, all the way to the end of the holder needles.  At the last stitch, cut the blue yarn, leaving a tail at least several inches long.  Draw this tail through the last loops as is done for chain bind off (scroll to the bottom of the chain bind off post for several different methods).  Then work in the tail.

Three needle bind off is often recommended for shoulder seams, but it can be used anywhere that two lines of live loops come together and require a sturdy seam to connect them.

One last thing:  usually, an equal number of stitches will be on each of the two holder needles when working a three needle bind off.  Sometimes, however, you wind up with an uneven number, either by accident or design.  In such a case, you have two choices:

1. either work three stitches off together with the working needle and the running yarn, which is a trick to even up the numbers of stitches while seaming
2. get rid of an extra stitch of by passing it over a neighboring stitch while the stitches are still on the holder needle.  With this second option, you are reducing the count so that equal numbers of stitches will be on both needles before seaming. 

Good knitting--TK

You have been reading TECHknitting blog on 3 needle bind off

Author error--three needle bind off

TECHknitting blog published a post on three needle bind off.  Unfortunately, I skipped a brain gear and wrote the directions BACKWARDS which I did not realize until an alert reader commented.

If you read the original post, please erase your memory banks and go to this corrected post, instead.

With apologies, TK

Dear Club Osinka/Уважаемый клуб Осинка

Please stop pirating my illustrations. It takes a long time to draw each one, each is copyrighted, and it is disheartening to see them ripped off.  If you want to supply a Russian translation, feel free, but link back to the original illustrations, instead of pasting them into your own document. (And if you ARE going to pirate the illustrations, at least put them in the right order with the correct instructions.  Sheesh.)

Пожалуйста, прекратите воровство моего иллюстраций.
Нарисовать каждую из них занимает много времени, они все

защищены авторским правом, и мне грустно видеть их
украденными. Если вы захотите перевести надписи на
иллюстрациях, пожалуйста, я не против. Однако вы должны
добавить ссылки на оригинальные изображения, а не просто
вставить мои картинки в свой собственный текст.

--TECHknitter

Increasing in seed stitch (and decreasing in seed stitch, too!)

Seed stitch (sometimes called moss stitch) is a stitch pattern which arranges knits and purls checkerboard-fashion so that every purl is surrounded by 4 knits, and every knit by 4 purls.

seed stitch arranges knits and purls checkerboard-fashion

Increasing and decreasing in a very regular stitch pattern like this is disruptive.

IMHO, the best little trick is to run a column of knits, increasing or decreasing along that line. Pushing the stitch pattern discontinuity up against a continuous column of knit stitches smooths and hides the irregularity.

Increasing seed stitch in circular knitting

Here is a schematic of what this would look like when knitting circularly, with the increase running along a single increase line, as it might be for a sleeve knit in the round.

circular knit seed stitch: increasing
along the center line, schematic

In the above schematic, the work is laid flat so you can see it, but in the real world, this sleeve will have been knit into a continuous spiral--a cone-shape, open at the bottom. In other words, for a circularly-knit sleeve, you would actually have knit this around and around, connected at the dotted lines. The continuous column of knits running down the schematic center is actually the sleeve underarm "seam." You have to use your imagination to "zip it shut" into a circle, along the red dotted lines.

Below is a photo of what an increase along a center line for an underarm looks like "in the wool."

circular knit seed stitch: increasing
along the center line, "in the wool"

How to make the increases

The little red loops stand for the increases, and you can use any kind of increases you like. One choice is e-loops slanting in different directions but most kinds of increases will give a good result: perhaps kfb (knit into the front and back) or the nearly invisible increase. Using a yo (yarn over) will result in holes, however, so that's not a great choice.

You need not worry whether the stitch to which the increase gives rise is ultimately going to be a knit or a purl. That's right--when you make the increases, you just make them however you like. Only on the FOLLOWING row do you have to worry about working that increased stitch as a knit or a purl, according to the checkerboard pattern established by the surrounding stitches. This is because a loop added to the fabric in the form of an added stitch does not take on the character of a knit or a purl until it is worked on the following row. If curious, here's more about this mystery of knitting. 

So the bottom line is, just make a pair of increases, and on the row or round after the increase, then work those new stitches as whatever they ought to be (whether knit or purl) as required to keep the checkerboard pattern going.

Increasing seed stitch in flat (back-and-forth) knitting

Above is about circular knitting. However, many patterns call for seed stitch to be worked flat (back-and-forth). Here is what the trick looks like when knitting flat and the increase is along the outer edges, instead of down the middle.

flat knit seed stitch: increasing
along the edges, schematic

Above is the schematic, and below is the final result "in the wool." The seam (red dotted lines) has not yet been sewn shut, and the sleeve is laying flat.

flat knit seed stitch: increasing
along the edges, "in the wool"

Rate of increase

In illustrating this post, I crammed lots of increases into a small sample, so the increases are worked every fourth row. However, an increase every 6th or 8th row is more common for a sleeve.  Yet though the rate may differ, the method remains the same. Just work your increases on either side of a center line (if working circular) or one stitch in from the edge line (if working back-and-forth), at the rate required.  Then, on the NEXT row, worry about whether the increased stitch should be worked as a knit or a purl, according to the seed stitch pattern established by the surrounding stitches.

Variation--more than one knit column separating increases

I've illustrated a single center column of knits, or a single column of knits along the fabric edge. Nothing stops you from from running two or three or more columns of knits, instead. In fact, if there will be seaming, remember that the edge stitches might be completely consumed, so an extra knit column along each outer edge might come in very handy. Consider ahead of time, and adjust the stitch count, if necessary,  to allow for the all-knit column(s) as well as to provide an odd or even number of stitches, as circumstances dictate, so that the stitch pattern is uninterrupted.

DEcreasing in seed stitch

All above relates to INCREASING in seed stitch, as might occur in a sleeve started at the bottom increasing from wrist diameter to shoulder diameter. Sometimes, however, you might be working the other way around, such as a sleeve started at the shoulder, and required to DECREASE to the wrist diameter as the sleeve is worked.

Luckily, DEcreasing in seed stitch is exactly the same theory, except that you simply work two stitches TOGETHER at the required rate, rather than form an increase. It is a nice touch to use a right leaning stitch like K2tog and the left leaning SYTK.

Once the excess stitch has been removed on either side of the center line, or on either edge of the row, continue to work the remaining stitches in checkerboard pattern as required by the surrounding stitches. Location of the decreases is the same as the location of the increases: if working circularly, one on either side of a center line of knits; if working back and forth, one decrease on each end of the indicated decrease row, one stitch in from the knit column(s) along each edge.

Does this look familiar?

When you get right down to it, this trick of shaping on either side of a column of knits is really just an adaptation of a method widely used in circular-knit raglan sweaters: if you have ever knit a raglan sweater in the round, this is the shaping which is done on either side of the 4 raglan seams, keeping the center column(s) in all-knits. The difference here is that the shaping (increasing or decreasing) is done in pattern of seed stitch, instead of stockinette, and the column(s) of stockinette disguises the stitch pattern discontinuity resulting from shaping.

--TK
You have been reading TECHknitting blog on increasing in seed stitch, and decreasing in seed stitch, too!