Curling scarf rescue mission--part two: the drop-column method

Here is the problem, a curling stockinette scarf made of blue and purple sparkly yarn.

Today's post shows a method called the drop-column method, which cured the stockinette roll and made this scarf lie flat. The drop-column method could hardly be easier.  Every fourth stitch, a column of stitches is dropped down the scarf length to create a ladder.  Then, the scarf is steam blocked. Once blocked, the drop-column fabric goes from wildly curly to flat.  Here is a picture of the front and the back of the same scarf, after the drop-column method has been applied.

Front and back

Despite how easy the drop-column method is, I almost didn't include it in this series for five reasons.

• It really was designed for WOOL.  If you try this method on any fabric except wool, you take the chance of RUINING YOUR SCARF, yes, maybe R.U.I.N.I.N.G. it FOREVER.  You have been warned--the drop column method is for wool alone!
• The finished look is quite lacy, not a look suitable for all situations.    
• The technique is rather primitive
• The resulting fabric is delicate--it snags easily, for example
• When the time comes to wash it, a drop-column scarf needs to be handled with the UTMOST care: hyper-gentle hand washing, laid flat to dry, NEVER, EVER in the washing machine.

Yet, despite these objections, in the end I decided to give this method its own post because it has three indisputable things going for it.

• IN WOOL, it really, really works.  
• It is really, really easy. 
• It is really, really fast.  

Bottom line: if you want to cure the roll on a WOOLEN scarf knit in stockinette, if you would wear a lacy scarf and if you are willing to care for a delicate fabric, let's take a look at the drop-column technique of curing stockinette roll. (If this is not your situation, remember, there are two more posts to come in this series!)

MY SCARF IS ALREADY CAST OFF--CAN I RE-WORK IT NOW? 

Are you surprised to see a method using live stitches recommended for restyling an already-finished scarf?  Way back in 2006, in the second TECHknitting post ever, knitting's inner nature was discussed. That post stated that any single knit stitch maintains its connection with all the other stitches in its row and its column, even after the knitting process is complete.

In practical terms, this means that knitting can be restyled even years after it first comes off the needles.  In even more practical terms, this means that yes, you can put the stitches of an already-knit scarf back on the needles and re-work the fabric, transforming curly rolled-up stockinette into a non-rolling drop-column fabric.  Here's how.

CATCH THE LIVE STITCHES at the 

TOP and BOTTOM of the SCARF on 

KNITTING NEEDLES

Restyling knitting is actually fairly common.  For example, re-working the length of a garment (making it shorter or longer) has already been dealt with in an illustrated post. The first step in length-restyling is the same as in fabric-restyling: getting the stitches back on the needles.

Basically, there are two methods.  First, you can carefully unpick the original bind-off, catching each live stitch on a knitting needle as the bind-off is released.  Alternatively, you can carefully snip a single stitch in the middle of the bottom row, then unravel in both directions from the middle, again catching the stitches on a knitting needle as they pop loose.  Click over to the length post for further details and an illustrated how to. You only need to follow along in that post until you get the stitches situated correctly, right arm forward (third illustration, step 6).  After you've gotten that far along, come on back to this post!

 

For the drop-column method,  not only is the bind-off undone, but the cast-on is also undone.  Again, this can be unpicked or snipped, and again, the length post has illustrated details (removing the cast-on is the same process as removing the bind off.)  After you have the top and bottom of the scarf on knitting needles, it will look like the illustration below.

MAKE SURE YOU HAVE ENOUGH YARN TO USE IN YOUR BIND OFF

In the illustration above, note the mini-skein of yarn at both ends of the scarf.  If you don't have any excess yarn from the scarf in your stash, then when you put the live stitches on your needles, you must unravel an additional two rows, in order to have enough yarn to bind off the top and bottom when the restyling is complete.The model scarf used up all the yarn, so the mini-skeins represent the top and bottom two rows which were unraveled and are being held in reserve for the bind-off.

DIRECTION OF DROP

Usually, ladders are dropped in stockinette top-to-bottom, rather than bottom-to-top.  If you are having a hard time telling which is which, you will see that there is an odd sort of half-stitch at the very edge of the bottom, which is absent at the top. In the illustration below, the half stitch is shown--it is the little extra purple stitch peering around the left side of the "real" blue edge stitch.

However, if you can't tell top from bottom, it really isn't all that important:  Stockinette is essentially reversible, being only one-half column off between top-to-bottom and bottom-to-top (which is why, just like when you unzip a provisional cast on, you may find that you get one less stitch working "up" (top needle) than working "down" (bottom needle) . Whichever way you run out the column of stitches, though, you will get a ladder.

SPACING THE COLUMNS TO DROP

The edge three columns are not worked in any way--we leave them alone to avoid stirring up tension issues at the side edges of the scarf.  Across the rest of the scarf, the idea is to drop every fourth stitch (3 stitches undropped, followed by a ladder).  If your stitch count will not fit evenly into these constraints, not to worry--the excess stitches are hidden between the edges of the scarf and the first dropped column on each side.  The edge flips over 180 degrees at the first dropped column, perfectly hiding any excess stitches.

If math is not your strong point, you can click through to this chart which shows where to slip stitches and where to drop them in order to distribute the columns as evenly as possible for all stitch counts between 15 and 50.

The illustrations below shows the chosen stitches dropped off the holding needle and run down three stitches.  The left picture is unstretched, the right, stretched.

At the bottom of each dropped column, stop the ladder two stitches from the bottom, and catch the loose stitch on a safety pin or stitch holder.  You don't want to get any closer than two stitches or you run the risk of making a hard-to-fix loopy mess.

 BIND OFF the SCARF BOTTOM

When you have run out all the columns, take a free knitting needle in your right hand, and the holder needle with the bottom stitches in your left hand, then bind off the bottom of the scarf--the chain bind off is very good for this situation. As you come to the loose stitch at each column-bottom sitting on its holder, undo the holder and place the held stitch on the tip of your left needle, then bind it off together with its left-hand partner, two stitches bound off as one.

BIND OFF the SCARF TOP

The next step is to bind off the top. Bind off the ordinary stitches in the usual manner.  When you come to the top of each ladder, grab it with your fingers and twist it into a backwards loop, then place the loop on the left needle.  This twisting maneuver transforms each ladder's top rung back into a stitch capable of being bound off.  Bind off all the top stitches including the twisted loops. Again, chain bind off is a good choice.

STEAM BLOCK the SCARF

The last step of all is to steam block the scarf. Below are before and after photos of the fabric--the before represents the look of the fabric when the columns have been run out, but not yet steam-blocked, the after shows how the scrunched-up ladder rungs blossom open from the blocking process.

The ladder rungs, before and after steam blocking

To get from "before" to "after," as you make each section of the scarf steamy with the iron, spread it apart with your hands by gently patting it wider.  When the steam dries away, the rungs will remain in the relaxed, open position shown in the after photo.

WHAT WILL MY SCARF LOOK LIKE?

The sparkly blue sample scarf corrected in this post came out quite loose and lacy. This is partly because it was knit loosely, partly because the yarn was of a nature to easily relax during the steam-blocking process. Pictured below is a different drop-column scarf, this one in red, which came out a bit differently.

If you compare the blue to the red, you'll see that the red scarf was knit tighter, and its yarn did not relax as much from the steam-blocking.  As a consequence, the red scarf's ladders are narrower and the fabric came out more wavy (bumpy) in cross section.  However, the stockinette curl has been cured on both scarves by the drop-column method, and both have been transformed from tight unwearable tubes into (delicate! lacy!) flat scarves.

STILL TO COME in this series

The next (third) post in this series will feature a method which works for all fibers, which is more robust than the drop-column method shown here, and which does not end up with a lacy look--a method more suitable to everyday use by all genders.  The last (fourth) post will show a method suitable for scarves which can't have their fabric re-worked: a lace scarf on a stockinette ground, for example, or stockinette color work.


'til next time, good knitting
--TK
You have been reading TECHknitting blog on curing curling scarves, part 2

Curling scarf rescue mission--part one: the problem and the solutions which DON'T work

"Why does my scarf curl?" and  "How can I stop my scarf from rolling?" must be among the most common questions asked and re-asked on internet knitting forums everywhere.


The root of the question is almost always a plain stockinette scarf -- a rectangle of fabric made back and forth, knitting on one row, purling the next -- although sometimes the question arises from a lace scarf with a stockinette background.  The problem is not the yarn, nor the technique--the problem is inherent in stockinette stitch itself.  In other words, stockinette fabric rolls because that is its nature. 

Knowing this after the fact, however, doesn't solve the problem when you've got a tightly curled piece of knitting in your hand--a piece which seems a useless disappointment.

It makes me sad to think of all the excitement of a first project turning to disappointment like this, so I've been knitting around and around until three different solutions have been worked out.  Specifically, I've knit some stockinette scarves which curl like mad--three of them.

Over the next three posts,we're going to flatten each one of these and turn each into a lovely, wearable scarf.  No longer do curled scarves have to be unraveled or put in a drawer: from now on, they can be reworked or corrected.

However, before we get to the rest of this series and show solutions which work, let's take a quick detour into solutions which don't work, or at least, which don't usually work very well.

Blocking, and why it doesn't work very well

Blocking is often recommended for curling the stockinette curl, either steam blocking or regular wet-blocking.  This may possibly work on a slick fiber like cotton or bamboo which has been LOOSELY KNIT, and is worth a try in that situation.   Yet on animal fibers, or wool or woolly acrylic, this solution is of limited usefulness. The fact is, it is practically impossible to block the curl out of stockinette without taking a real chance that you'll have to resort to actually ironing it.  Once on this road, you might find you have to iron the life right out the knitting before it will consent to lay flat.  In other words, if you chose to cure stockinette's curl with blocking, then when you finally do succeed in getting the curl out, the knitting has a real chance of having become a limp rag.  More commonly, a severe blocking tames the problem temporarily, but the curl returns as the scarf is worn.

Edging, and why it doesn't work very well

Another popular suggested cure is putting a non-curling edging onto the scarf.  Seed stitch, moss stitch or garter stitch are often recommended.  It is true that these fabrics do not curl (and are therefore an excellent choice for the next scarf!)  However, the usual result from applying a non-curling edging to a curled scarf is that, although the edging itself does not curl, the scarf to which it is attached will continue to curl, taking the edging right along with it.  There are ways to attach an edging so that the edging will not curl, but this kind of edging, called zig-zag edging, has to be knitted in, it cannot be applied after the fact.

Another species of edging often recommended is to crochet an edging onto the scarf.  This also will not work for the same reason a knitted edging will not work: the crocheting itself does not curl, it is the knitting which curls, taking the crocheted edge right along with it.

In the next post of this series (drop columns, linky below) we'll flatten the curled-up sparkly blue scarf shown at left. 

PS:  This is part 1 of a 4 part series.  The other parts are here:
part 2--drop columns
part 3--forming ribbing
part 4--lining the scarf

Hems and facings: the inside front corner

A while ago, TECHknitting ran a 10-part series on knitting better cuffs and bands.  The fifth post of that series dealt with sewing shut hems and facings.  Recently, an anonymous commenter to that post asked:

• I'm having trouble turning corners with the hemming of my cardigan. I have hems down the center of the sweater and then round to the hem of the bottom of the sweater. Your tips on hemming were helpful but when I try to make the turns they aren't very neat - any suggestions or tips?

This is truly a case where pictures are worth thousands of words, so here you go, Anon!

Above is the "ordinary" method of getting a tidy join on the inside of a sweater front where the front facing and the bottom hem come together.  The front facing is made as long as the front of the sweater, but the bottom hem is knit narrower than the width of the sweater front.  When both hem and facing are flipped into position and sewn in place, there is no overlap, yielding a quite neat turn.  I, personally, would use this ordinary method for sweaters with buttons and buttonholes, because the entire length of the front band is hemmed by a single length of fabric--there is no seam to conflict with the bottom button, as there would be with the mitered finish, shown below. 

Above is a different way of making the corner--both hem and facing are knit at at a 45 degree angle, using short rows.  When they are both flipped into place, they make a neat and pretty join at the bottom corner.  This mitered hem makes a very pretty finish for a swing jacket--the kind often held shut by a single button at the top.  In swing jackets, the hem is often in view, and the 45 degree miter is a pretty look for that application.

As shown above, it is also possible to knit a mitered hem and facing all-in-one, with matching double-shaping at the dots--matching left and right increases or matching left and right decreases, depending if you have started at the inner or outer edge of the all-in-one. 


Good knitting!
--TK

You have been reading TECHknitting blog on mitered hems for knitwear

A little felted purse KAL, part 3

This is the last installment of the little purse KAL. (Click here for the first part, and here for the second part, click here for the accompanying zipper-installation video tutorial.)  In this final installment, we are going to flatten the bottom of the purse, felt the purse and attach the zipper pull.

FLATTENING THE BOTTOM

Although I have tried very hard to avoid all sewing, there comes a time when even the sew-o-phobic must get out a sewing needle, and so it is for flattening the purse bottom.  But, rest assured--there are only 3 or 4 stitches necessary, and they can be as large, rough and untidy as you like since no one will ever see them, not even you.

The "before" illustration (top) shows the OUTSIDE of the purse when you have finished knitting it.

Next, turn the purse inside out.  Grasp the outside edge of the corners and draw the outer edges of each corner together over the middle of the center seam, as shown in the middle illustration.  Using the length of yarn you left dangling at the corner, tack the corners together with a stitch or two, then--using the same length of yarn--tack the joined corners to the center of the seam, also as shown on the illustration

When you turn the purse right side out again, you will find that you have created a folded-in flat bottom, and that the purls have become the fold line, as shown on the "after" illustration at the bottom.

The next step is to felt the purse, so here's ...

A LITTLE PRIMER ON HAND FELTING

Hand felting allows for greater control than felting in a washing machine, especially for a small object like this purse. Therefore, I highly recommend hand felting for this project.

Felting requires to things two happen simultaneously:  a) temperature change and b) agitation. In hand felting, temperature change is supplied by working at the kitchen sink with first hot, then cold water running on your project.  The agitation is supplied by you. 

Here's how:

Wear rubber dishwashing gloves or your skin could be abraded. Wet item thoroughly with hot water. Add two drops dishwashing detergent (the kind for hand washing of dishes, not the machine kind). Working under a trickle of hot water, knead and rub but do not wring. Try to knead and rub evenly over the entire surface of the purse to avoid distortion of the shape. When most of the detergent is gone, switch water to cold, turning the volume of water up briefly so that the temperature of your project will change quickly.  Once the project has become completely cold (a few moments for such a small project) turn the cold water back to a trickle, add more detergent and again knead and rub until detergent is out. Repeat the same procedure with hot water, then cold again, etc. 

Once every hot/cold cycle, inspect to be sure purse isn't cross-felting closed on inside.  Also, inspect the sides and bottom, and tug as needed to shape them as shown in the photo of the finished purse. 

Felting is a rather random process: sometimes it goes unbelievably quickly--one or two hot/cold cycles. Conversely, sometimes it goes worryingly slowly, but take comfort: all non-superwash sheep's wool will felt eventually although different colors or yarns might felt at different rates. The most amount of felting usually occurs when the cold water hits, but sometimes the hot water is more active.

As you can see from the below photo, the finished purse was felted only lightly--the original stitch definition is still visible.  Even so, however, this purse is stiff enough to easily stand on its own.

ZIPPER PULL DECORATION

Make a little felt marble by taking some scrap strands of yarn in your (dishwashing-glove-clad) hands, then repeatedly rolling them in your hands under hot, then cold water with dishwashing detergent as a lubricant, until the strands cross-felt together and the marble hardens. Attach the marble to the zipper pull with a length of yarn, attached decoratively onto the existing zipper pull.

The finished purse, felted, with zipper pull decoration attached

A little felted purse KAL, part 2

The first part of this little felted purse KAL took the process as far as the top trim (lavender in color) which grows out of the zipper tape according to the new method of attaching knitting to zippers using a tiny latch-hook, called a "knitpicker."

This method is further described in the Winter 2010 issue of Interweave Knits.

This second installment of the KAL will show how to make the body of the purse, starting with the green yarn.  (Of course, you can make the whole purse one color, or striped in many colors--whatever you like!  The model just uses green as a contrast color to make clear which is the top and which is the bottom of the work.)

There are a lot of words and several illustrations, but only because it's SO much harder to describe in words and pictures what would take a moment to demonstrate in real life.  In other words, don't be put off by the seeming complexity, it really is very simple to DO, just hard to DESCRIBE.

Part 2: Body of purse

Superwash foundation round for feltable yarn: Cut a 60" length of superwash wool and double it. At the lowest level (where the fabric from the zipper tape lies) insert crochet hook from the outside of the tape (no teeth) toward the inside (where the teeth are), and draw doubled loops through the base of the superwash trim--purl side of trim should face you.

As shown in the above schematic, one doubled loop is drawn between each stitch originally picked up with the latch hook in part 1 of this KAL. If the work is tight and the crochet hook is not working very well, you can resort back to the knitpicker latch hook to pull the doubled yarn between the stitches, particularly the tight stitches on the ends of the zipper tape.

The yarn in the above schematic is illustrated in two colors so you can distinguish the two stands, but in real life, both strands are the same color as each other and the same color as the superwash trim.  This is so that the picked up stitches will not show in a different color against the trim.

Below is another take on the pick-up process, again showing how the loops of the body of the purse are being pulled through the base of the trim.  This is a double cut-away illustration.  The inner box (light background) shows the zipper tape with the purl fabric of the trim arising out of it.  In the outer box (darker background) the purl fabric has been cut away so you can see the relationship of the drawn-through loops to the underlying zipper tape, as well as to the trim itself. Note that in both the illustration above as well as the illustration below, the new loop is being drawn out between the bottom stitches of the trim, not through them.  (If you click on this--or any other--illustration, it will enlarge.)

The above illustration does not show the loops being deposited on the dpn because only the first draw-through is illustrated.  The schematic illustration earlier in this post, showing several stitches picked up,  does show how these loops are to be deposited on the dpn as you go around. The dpn set to use for this pick up is the smaller dpn's--the same ones you knit the trim with.

The opening schematic also shows where to begin the pick up.

Add additional dpn's as you draw loops up all around. You'll wind up with 32 doubled loops on your smaller dpn's.

Increase stitch count: Switch to larger dpn's and ordinary, feltable woolen yarn. Using a fifth dpn from the larger set, knit around the stitches picked up. Note that some doubled loops are to be knit each separately, so that the doubled loop gives rise to two stitches, while other doubled loops are to be knit by knitting both loops as one, so that the doubled loop gives rise to only one stitch.


Specifically, in the above schematic, where a red "2" appears, you are to knit each of the two loops separately to give rise to 2 separate stitches; where a blue"1" appears, you are to knit the two loops in that location as one, to give rise to a single stitch.  As you can see, there are only 4 single stitches, basically on either side of the center of the zipper tapes.  This long straight run of stitches does not require the ease necessary closer to the corners, which is the reason for the single stitches at this location. In all, you'll have 56 stitches, which could conveniently be arranged onto 4 dpn's of 14 st each.

As you go around, you may find it easier to open the zipper--this literally "opens up" the work, making the knitting much easier. 

Knit body of purse: Knit 4 rounds of contrast color (green on sample). Switch to main color. Work a total of 19 rounds altogether not including superwash foundation round.

Next, purl one round.

(The switch between colors, as well as the knit/purl switch can be made jogless.)

Next, knit 9 additional rounds, ending on a column centered under the zipper split in the zipper tapes. Place half the stitches on 1 needle, half on another, with the division between the stitches being parallel to the direction of the zipper.

In other words, the two needles are to be arranged so that one needle carries all the stitches arising out of the left side of the zipper tape, while the other needles carry the stitches arising out of the right side of the zipper tape.

Hold one needle behind the other. Using three-needle bind off, bind off both halves together VERY LOOSELY!  Your final result is represented by the below schematic.

Perfectionists can turn the purse inside out to bind off from inside.  Some finagling is needed to get the needles through the zipper opening, but it can be done. Leave a 10" tail after bind-off is complete.

In the next post, we'll flatten the purse bottom, felt the purse and attach the zipper pull.
--TK
* * *
This is the second in a three-part series.

Click here for the first part of the series. 

Click here for the third part of the series

Click here for the accompanying video tutorial 

You have been reading  TECHknitting on: Feltable Purse KAL part 2: no sew zippers in knitwear.

A little felted purse KAL, part 1

The current issue of Interweave Knits has an article (by me) about installing zippers without any sewing at all, using a very special kind of very small latch hook called a "knit-picker."  There are two different methods described in the article for installing zippers:  working from the zipper outward, or installing a zipper in an already-made item.  There is also an Interweave Knits video on the technique.

If you have a copy of the article, or have viewed the video, and would like to explore the method of working from the zipper outward, here is a pattern for a little felted purse using that technique. The project is presented as a KAL  (knit along) in several installments.  Today, we'll lay out the materials and get as far as the top trim.



With its flat bottom, this little purse is roomy beyond expectation: a cell phone and other necessaries fit neatly alongside bills and change. Made up in an afternoon, these are great for gifts too.

Materials, needles and gauge

*Scrap amount of superwash worsted weight yarn, the model uses Cascade 220 superwash--this is the lavender trim at the top of the purse
* Scrap amount of ordinary (feltable) woolen yarn in contrast color, the model uses Cascade 220 in green
* Approx 1/2 ounce ordinary (feltable) woolen yarn in main color, the model uses Cascade 220 in dark purple
*Closed-end nylon or polyester coil zipper in matching color
*"Knit-picker" type mini latch-hook--this is explained in the magazine article
*Crochet hook in size to match yarn
*large eyed sewing needle
*set of 5 small dpn's to give gauge of about 6 st/in
*set of 5 larger dpn's to give gauge of about 5 st/in

The average finished size is 3" (L) x 2.5" (H) x 2.25" (W) but this can vary by as much as 1/4 inch larger or smaller in each measurement, depending on how much felting you choose to do.

KAL Part 1: Zipper and Top Trim

Shorten zipper to 3 3/4 inches working length as shown in the Interweave Knits article, or however you usually shorten a zipper.

Per illustration 1 above, mark zipper tape for pick up--two dots across each end of each tape, and 12 evenly spaced between, as shown. (Zippers have seam guides woven into them, so finding a straight line along the tape is easy.)

Superwash top trim: Using smaller dpn's, mini-latch hook (aka "knit-picker") and the knitting needle method described in the Interweave Knits article, and using 1 dpn for each side of zipper tape, pick up 1 st for each dot.

Begin the pick up at the arrow, working down the left zipper tape first.  Ignore the square and different colors for the moment: for the purpose of picking up stitches, each dot equals one loop to be picked up through the zipper tape.

 


Per illustration 2, above, once you have picked up the stitches through the zipper tape, it should look like this, with one needle holding all the stitches on one side of the zipper tape, and a second needle holding all the stitches from the other side of the tape.

Arrange the picked up sts on 4 dpn's: 6 across each end and 10 along each side. Needle 1 holds purple dot stitches; needle 2, green dot stitches; needle 3, blue dot stitches; needle 4, brown dot stitches. You could re-arrange the stitches onto the four dpn's by sliding the six end loops around onto their respective needles, but these loops are tight, and it's easy to lose one.  Therefore, in practice, the easiest way is to re-arrange the stitches by is by knitting them off when working the second round.

Second round: In this round, besides re-arranging the stitches onto 4 dpn's, you'll also increase stitches using the kfb method, all along the sides of the zipper tapes.  This increasing gives the purse its boxy shape. Here's how:

Bring yarn through zipper tape opening at pink square and commence to knit in direction of pink arrow as follows: Work 1 st in each of the 3 purple dot sts on needle 1, kfb in each of the 10 green dot stitches on needle 2, work 1 st in each of the 6 blue dot sts on needle 3, kfb in each of the 10 brown dot sts on needle 4, end round by working 1 st on each of the 3 remaining purple dot stitches on needle 1, you'll have 52 total sts on needles.

(Click here for further information about kfb--knit front and back.)

Work for 7 add'l rounds, knitting plain. Bind off. Top trim made. Note: the trim lies purl side out, with the knit side curling towards the zipper teeth, as shown in the opening illustration.

(Click here for a method of binding off in the round which hides the gap appearing at the last stitch of an ordinary bind off)


This is the first in a three-part series.

Click here for the second part of the series
Click here for the third part of the series
Click here for the accompanying video tutorial 

Good knitting!
--TK

No-sew zippers

Would you like to learn to insert zippers into knitwear with NO SEWING?  If your answer is yes, you have several ways to learn!

Method 1:  On November 30, 2010, stop by your favorite newsstand and pick up a copy of Interweave Knits magazine.  In a "Beyond the Basics" feature article which I have written, the full instructions appear. I'm pretty excited about sharing this method with you--it's taken a lot of years to figure it out, and it's pretty nifty to be able to create zippered knitwear with absolutely no sewing whatsoever.  For real! None. Nada. No sewing.

Method 2: The second method to learn this new technique will take place on April 30, 2011, when you can attend a workshop on installing zippers at the Minnesota Knitter's Guild 25th anniversary "Yarn Over" teaching event.  In my first foray into teaching in a LONG time, I'll be giving two workshops, actually. One will be about lots of different tips and tricks of the kind popularized on this blog, and the other will be on buttonholes (including the tulip buttonhole) as well as buttonhole alternatives and zippers.

The sign up is not yet open, but if you are a member of the Minnesota Knitter's Guild, you get first dibs at signing up. For further information, you can also visit the Yarnover group on Ravelry.

Method 3:  (updated December 23, 2010) There is a new video featuring Eunny Jang, the Interweave Knits editor, demonstrating the no-sew zipper technique.

Here's hoping you will like the new method, and I hope to meet some of you in real life at the 25th anniversary Yarnover event button/buttonhole/zipper workshop (or the tips and tricks workshop!) April 30, 2011.

Best regards--TK

A half-million LOTS and LOTS of views. Thank you, I am humbled

Today, TECHknitting reached a major milestone--a half-million LOTS and LOTS of views since inception. Thank you all so much for coming by. I am humbled by your patronage.

Edited 9-8-10 Actually...

Further investigation reveals that the number of page views is actually far higher than a half-million (something to do with what page/s the stat-counter counts). It is now estimated to be more than 1 million views, and maybe even more than 1.5 million?!? eep.

If it seems like things are winding down here at TECHknitting, don't believe it for a second. There are tons of projects taking place backstage here--mostly test knitting and development of patterns for small shaped things, such as gloves. Like the new Tulips buttonholes, some of these patterns have been in development for years and years, so a big push came on this summer to try and make some progress. And, of course, the series on style and body shape is "to be continued"--it's at a standstill now (too many other projects) but lots of new illustrations have already been done and these should come out this fall.

Also coming out this fall will be an article in Interweave Knits, winter edition, on how to install zippers with absolutely **no** sewing. It's all very hush-hush at the moment, but I'm hoping you'll like it--this new procedure will make zippered knitwear a breeze, instead of the sewing chore it presently is, and all will be revealed in due course.

So, thank you dear readers, for making TECHknitting a stop on your internet rounds and staying to visit for a while. We'll talk more soon.

Have a great rest-of-the-summer.

--TK

Felted Mitten Tutorial in Knitcircus e-Magazine

The new issue of Knitcircus e-magazine is out, and contains a tutorial by TECHknitter (hey, that's me!) for making felted mittens, as part of the fall pattern collection.

Here's the link.

These kids' mittens are very easy to make--very forgiving of mistakes. Although made by hand, these are actually superior in performance and durability to high-tech winter fabrics. The "alien eyeball" pair you see with purple cuffs are quite used: they were worn as the only hand-coverings for two entire winters by an active boy, here in the frozen north of Wisconsin before being photographed! Now outgrown, they are still good for further wear by another, smaller child.

There's just one little error in the pattern presentation: The e-magazine (which contains a sort of a catalog for the pattern download) indicates that the mittens are made with Blue Sky Alpaca, but they are not. The actual pattern in the download correctly identifies the mittens as being made with either Ella Rae Classic/Ella Rae Superwash worsted-weight yarns or Dalegarn Hielo /Falk DK weight yarns.

--TK

Podcast Interview

Laura Neel aka (Math4knitters) who blogs for the Journal Gazette of Fort Wayne, Indiana, recently interviewed me for a podcast.

Some subjects include the 8-trick pocket hat, the work to glory ratio and body type and knitting.

If interested, click through to her post and listen along.

Happy 4th of July, everyone!

--TK